Configures the RFSG attenuation type so that the power level at the DUT port is corrected to match the same power level set by the Configure RFSG Power Level VI.

Configure RFSG Attenuation (Constant) VI
Specifies a single value to compensate for the attenuation on the signal path from VST RF out to the ports connected to the DUT.
Configure RFSG Attenuation (XML File) VI
Specifies the attenuation to the RFSG session for the path from VST RF out to the ports connected to the DUT. The path is based on the RFSG system calibration XML file created using the RF System Calibration Assistant. Use the RF System Calibration Assistant to save multiple generator path calibrations in a single XML file. Specify the path to use with the RFSG Attenuation Path Name input. Although the RF System Calibration Assistant allows you to calibrate one path at multiple power levels for the same frequency, this API only supports calibrations done at one power level for each frequency. This function returns an error if you do not wire the RFSG XML File Path input or specify an empty or relative path.

Parent topic: Configuration

S-Parameter Measurement Library LabVIEW VI Reference

Log in to get a better experience