Adding Your Device to a Project

Register your device with SystemLink or LabVIEW Communications System Design Suite before adding it to a project.
  1. In LabVIEW Communications System Design Suite, create a new project or open an existing sample project.
  2. In the SystemDesigner palette, navigate to the location appropriate for your version of LabVIEW Communications System Design Suite.
    VersionStep
    2.0 Software Defined Radio » USRP RIO » NI USRP-2974
    2.1 to Current PC » Devices » Software Defined Radio » USRP RIO » NI USRP-2974
  3. Select the NI USRP-2974 target and place it on the diagram.
  4. In the Configuration pane, take the action appropriate for your version of LabVIEW Communications System Design Suite.
    VersionStep
    2.0 Select NI USRP-2974 from the Mapped To dropdown menu.
    2.1 to Current Click Hostname to choose a controller that has already been registered or to change the hostname of your controller.
    Note If there is an external USRP RIO device connected to the PCIe x4 port of the USRP-2974 back panel, you must repeat steps 2 through 4 to map to the corresponding USRP RIO device in the Configuration pane.