Specifying Multiplexers and Multiplexed Connections in a Pin Map (TSM)
- 更新日2025-07-31
- 1分で読める
You must define the switch and route in the pin map for the test program to access a switch route from the TSM Code Module API TSM Code Module API. Refer to the Switching.pinmap in the Switching Example for an example of a pin map that contains multiplexed connections.
The pin map specifies switches as <Instruments>/<Multiplexer>elements. Each connection between an instrument channel and a DUT pin that is routed through a switch must specify a <Connections>/<MultiplexedConnection> element, as shown in the following figure.
The <MultiplexedConnection> element defines a connection between a single instrument channel and the same DUT pin on multiple sites. The <MultiplexedConnection> element also contains a list of <MultiplexedDUTPinRoute> elements that each specify the route required to connect an instrument channel to a DUT pin on a specific site.
関連コンテンツ
- TSM Code Module API
- Switching (TSM)
This example demonstrates a test program that uses four sites and three shared instruments, as shown in the following figure. The test program shares the DMM1 instrument across all four sites and shares the DMM2 and DMM3 instruments across two sites each. All three instruments contain only one channel routed to each site using a switch (MUX).
- Pin Map File XML Structure (TSM)