Code Option Name Description Default Unit Recommendation
TNOM Nominal temperature Sets the normal temperature at which model parameters are measured and calculated. 27 ×C Do not change unless you want your simulation results to match data book specifications that were extracted at a temperature other than 300.15 ×K.
BYPASS Allow bypass of unchanging elements Turns off/on the device bypass scheme for non-linear model evaluation. Turning off may increase simulation time Off — Do not change default.
DEFAD Default MOSFET area of drain Sets the value for MOS drain diffusion area. 0 m2 Use default value unless you know how to specify a value from a MOS device datasheet.
DEFAS Default MOSFET area of source Sets the value for MOS source diffusion area. 0 m2 Use default value unless you know how to specify a value from a MOS device datasheet.
DEFL Default MOSFET length Sets the value for MOS channel length. 0.0001 m Use default value unless you know how to specify a value from a MOS device datasheet.
DEFW Default MOSFET width Sets the value for MOS channel width. 0.0001 m Use default value unless you know how to specify a value from a MOS device datasheet.
TRYTOCOMPACT Try compaction for LTRA lines Applicable only to lossy transmission line component. When this option is turned on, Multisim tries to reduce data storage and memory usage needed for transient simulation of circuits containing lossy transmission lines. Off — —
OLDLIMIT Use SPICE2 MOSFET limiting — Off — —