SignalBasedFrame Members

	Name	Description
	SignalBasedFrame	Initializes a new instance of the SignalBasedFrame class.

	Name	Description
	CreateAutomaticFrameProcessing	Creates an AutomaticFrameProcessing section under the frame, which contains sections to add a cyclic redundancy check (CRC) and counter.
	CreateFrameFaulting	Creates a FrameFaulting section under the frame, which contains channels you can use to control the transmission of outgoing cyclic frames.
	CreateFrameInformation	Creates a FrameInformation section under the frame, which contains channels with timing and ID information for incoming frames.
	CreateMode	Creates a Mode section under the frame, which organizes multiplexed signals.
	CreateMultiplexer	Creates a Multiplexer signal under the frame. A single frame can contain only one Multiplexer signal.
	CreateSignalBasedSignal	Creates a SignalBasedSignal under the frame.
	DisableTransmission	Disables transmission of the outgoing frame when the value of DisableChannel is non-zero.
	EnableTransmission	Enables transmission of the outgoing frame.
	Equals	Determines whether the specified Object is equal to the current Object. (Inherited from Object.)
	Finalize	Class Destructor (Overrides Section.Finalize().)
	FindChildrenByGUID	Gets an array that contains the child BaseNode elements of the current node that match the specified TypeGUID. (Inherited from BaseNode.)
	FindFirstChildWithName	Gets the first child node with the specified name. (Inherited from BaseNode.)
	FindNodeByPath	Gets a node using the specified path. (Inherited from BaseNode.)
	GetAutomaticFrameProcessing	Gets the Automatic Frame Processing section of a frame, which contains the CRC and Counter sections for the frame.
	GetChildren	Gets an array that contains the child BaseNode elements of the current node. (Inherited from BaseNode.)
	GetDocumentPath	Gets the path to the system definition file that owns this node. (Inherited from BaseNode.)
	GetDocumentRoot	Gets the Root node of the system definition file. (Inherited from BaseNode.)
	GetFrameFaulting	Gets the Frame Faulting section of the frame, which contains the SkipCyclicFrames and TransmitTime channels for the frame.
	GetFrameInformation	Gets the Frame Information section of the frame, which contains the ReceiveTime and TimeDifference channels for the frame.
	GetHashCode	Serves as a hash function for a particular type. (Inherited from Object.)
	GetModeList	Gets an array that contains the Mode elements from the current SignalBasedFrame.
	GetMultiplexer	Gets the Multiplexer signal for the frame, which defines an area within the frame that contains different dynamic signals based on the multiplexer signal value.
	GetParent	Gets the parent node of this node. (Inherited from BaseNode.)
	GetSignalBasedSignalList	Gets an array that contains the SignalBasedSignal elements from the current SignalBasedFrame. This method gets all the signal format signals in the frame.
	GetType	Gets the Type of the current instance. (Inherited from Object.)
	MemberwiseClone	Creates a shallow copy of the current Object. (Inherited from Object.)
	RemoveNode	Removes this node from the hierarchy, if the node can be removed. (Inherited from BaseNode.)
	RenameNode	Renames this node to the name you specify, if the node can be renamed and if the name you specify is not already in use by a sibling of this node. (Inherited from BaseNode.)
	SetTransmitTrigger	Sets event-triggered frame transmission on the frame.
	ToString	Returns a String that represents the current Object. (Inherited from Object.)

	Name	Description
	BaseNodeType	Gets a reference to the internal representation of this node. (Inherited from BaseNode.)
	ClusterName	Gets or sets the name of the cluster in the XNET database that contains the frame.
	DatabaseAlias	Gets or sets the alias for the XNET database that contains the frame.
	Description	Gets or sets the description of this node. (Inherited from BaseNode.)
	DisableChannel	Gets a reference to the disable channel for the frame. A disable channel disables transmission of an outgoing frame when the value of the disable channel is non-zero.
	Disabled	Gets whether transmission of the outgoing frame is disabled.
	Enable64Bit	Gets or sets whether U64 bitfield representation is enabled for the frame.
	EnableFrameCyclicTrigger	Gets or sets whether a frame cyclic trigger, which transmits outgoing frames when TriggerChannel has a non-zero value, is enabled for the frame.
	EnableSoftwareCyclicTrigger	Gets or sets whether a software cyclic trigger, which transmits outgoing frames at regular intervals specified by TransmitTime, is enabled for the frame.
	FrameType	Gets or sets the frame type (CAN data, CAN remote, FlexRay data, or FlexRay null) of a frame under a CAN or FlexRay port.
	ID	Gets or sets the identifier number for the frame. For LIN frames, this is the frame ID. For CAN frames, this is the Arbitration ID. For FlexRay frames, this is the Slot ID in which the frame is sent.
	MD5	Gets the MD5 message digest for the frame.
	Name	Gets the name of this node. To rename a node, use the RenameNode method. (Inherited from BaseNode.)
	NodeID	Gets the ID of this node. (Inherited from BaseNode.)
	NodePath	Gets the path to the node within the system definition file. (Inherited from BaseNode.)
	OwningDatabase	Gets or sets a reference to the XNET database that contains the frame.
	PayloadLength	Gets or sets the number of bytes in the payload of the frame.
	Phase	Gets or sets whether to reset the timer after TransmitTime elapses when EnableSoftwareCyclicTrigger is true (True in Visual Basic).
	StartTimeOffset	Gets or sets the amount of time that elapses between the session start and the transmission of the first frame.
	TransmitTime	Gets or sets the interval, in seconds, at which a software cyclic trigger transmits outgoing frames when EnableSoftwareCyclicTrigger is true (True in Visual Basic).
	TransmitTrigger	Gets the trigger type (channel value change, trigger channel not zero, and so on) specified for an event-triggered frame.
	TriggerChannel	Gets a reference to the channel that is checked for a non-zero value when EnableFrameCyclicTrigger is true (True in Visual Basic).
	TypeGUID	Gets the GUID associated with the node. Attempts to set the GUID of a BaseNode will generate an exception. (Inherited from BaseNode.)

Reference

SignalBasedFrame Class

NationalInstruments.VeriStand.SystemDefinitionAPI Namespace

VeriStand .NET API Reference

Sommaire

SignalBasedFrame Members

Methods

Properties

See Also

Reference

Log in to get a better experience