Write Sequencer Register
- Mise à jour2023-02-17
- Temps de lecture : 2 minute(s)
Write Sequencer Register
Writes a value to a pattern sequencer register.
Use pattern sequencer registers to pass numeric values between the pattern sequencer and a runtime test program.
Inputs/Outputs
session in
Instrument session obtained from the niDigital Initialize with Optionsnode.
sequencer register
The sequencer register you want to write to.
| reg0 | Reads sequencer register 0. |
| reg1 | Reads sequencer register 1. |
| reg2 | Reads sequencer register 2. |
| reg3 | Reads sequencer register 3. |
| reg4 | Reads sequencer register 4. |
| reg5 | Reads sequencer register 5. |
| reg6 | Reads sequencer register 6. |
| reg7 | Reads sequencer register 7. |
| reg8 | Reads sequencer register 8. |
| reg9 | Reads sequencer register 9. |
| reg10 | Reads sequencer register 10. |
| reg11 | Reads sequencer register 11. |
| reg12 | Reads sequencer register 12. |
| reg13 | Reads sequencer register 13. |
| reg14 | Reads sequencer register 14. |
| reg15 | Reads sequencer register 15. |
value
The value you want to write to the register.
error in
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Default value: No error
session out
Handle that identifies the session in all subsequent NI-Digital node calls.
error out
Error information.
The node produces this output according to standard error behavior.