Read Sequencer Register
- Mise à jour2023-02-17
- Temps de lecture : 2 minute(s)
Read Sequencer Register
Reads the value of a pattern sequencer register.
Use pattern sequencer registers to pass numeric values between the pattern sequencer and a runtime test program. For example, you can use this node to read a register modified by the write_reg opcode during a pattern burst.
Inputs/Outputs
session in
Instrument session obtained from the niDigital Initialize with Optionsnode.
sequencer register
The sequencer register to read from.
| reg0 | Reads sequencer register 0. |
| reg1 | Reads sequencer register 1. |
| reg2 | Reads sequencer register 2. |
| reg3 | Reads sequencer register 3. |
| reg4 | Reads sequencer register 4. |
| reg5 | Reads sequencer register 5. |
| reg6 | Reads sequencer register 6. |
| reg7 | Reads sequencer register 7. |
| reg8 | Reads sequencer register 8. |
| reg9 | Reads sequencer register 9. |
| reg10 | Reads sequencer register 10. |
| reg11 | Reads sequencer register 11. |
| reg12 | Reads sequencer register 12. |
| reg13 | Reads sequencer register 13. |
| reg14 | Reads sequencer register 14. |
| reg15 | Reads sequencer register 15. |
error in
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Default value: No error
session out
Handle that identifies the session in all subsequent NI-Digital node calls.
value
Value read from the sequencer register.
error out
Error information.
The node produces this output according to standard error behavior.