Use this template as a starting point for developing a streaming application where a write endpoint is required; for example, streaming data from the coprocessor to a compatible VST.

The Transmit VI operates as follows:

  1. Implement your transmitter IP in the defined transmit single cycle timed loop and connect it to the Write Data Stream Endpoint VI using the defined signals.
  2. Configure the Endpoints data type to match the expected data type of the IP to which it is connected.
  3. Configure the constructor data type to match the data type selected for the endpoint.
  4. Configure the buffer process clock frequency to match the expected throughput of your application.
  5. Leave the Instruction Framework Host Interface Single Cycle Timed Loop and the Endpoint Collection VIs as-is, unless you are adding more endpoints or need to modify the Instruction Framework Collection Builder.