Specifies whether you want the Advance Trigger to be a digital edge or software trigger.

Note Set this property to None if you set the Acquisition Type property to Spectrum or if you set the acquisition type parameter to Spectrum using the niRFSA Configure Acquisition Type VI.

Default Value: None

Supported Devices: PXIe-5644/5645/5646, PXI-5661, PXIe-5663/5663E/5665/5667/5668, PXIe-5820/5830/5831/5832/5840/5841/5842/5860

Related Topics

Triggers

PXI Trigger Lines

Remarks

The following table lists the characteristics of this property.

Short Name Advance Trigger Type
Data type ci32.png
Permissions Read/Write
High-level VIs niRFSA Configure Trigger
Channel-based No
Resettable Yes
None 600

No Advance Trigger is configured.
Digital Edge 601

The Advance Trigger is not asserted until a digital edge is detected. The source of the digital edge is specified with the Digital Edge Advance Trigger Source property.
Software 604

The Advance Trigger is not asserted until a software trigger occurs. You can assert the software trigger by calling the niRFSA Send Software Edge Trigger VI and setting the trigger input to Advance Trigger.