Triggers:Sequence Advance Trigger:Trigger Type
- Updated2025-10-06
- 1 minute(s) read
Specifies the behavior of the Sequence Advance trigger.
Refer to the Configure Triggers and Events topic in your instrument user manual for more information about triggers and events.
Note
This property is not supported by all devices. Refer to
Supported Properties by Device
for information about supported devices.
Default Value :Refer to Supported Properties by Device for the default value by device.
Note To specify a channel name when accessing this property, you must first initialize the session using the Initialize With Independent Channels VI.
Remarks
The following table lists the characteristics of this property.
| Short Name | Sequence Advance Trigger Type |
| Data type |  |
| Permissions | Read/Write |
| High-level VIs | niDCPower Configure Digital Edge Sequence Advance Trigger, niDCPower Configure Software Edge Sequence Advance Trigger, niDCPower Disable Sequence Advance Trigger |
| Channel-based | Yes |
| Instrument-based | No |
| Resettable | No |
| Digital Edge | 1014 | The data operation starts when a digital edge is detected. |
| Software Edge | 1015 | The data operation starts when a software trigger occurs. |
| None | 1012 | No trigger is configured. |