Specifies when the measure unit should acquire measurements. Unless this property is configured to On Measure Trigger , the Measure Trigger Type property is ignored.

Note NI-DCPower uses the terms "source" and "output". However, while sinking with electronic loads and SMUs these correspond to "sinking" and "input", respectively.

Default Value :Refer to Supported Properties by Device for the default value by device.

Note To specify a channel name when accessing this property, you must first initialize the session using the Initialize With Independent Channels VI.

Remarks

The following table lists the characteristics of this property.

Short Name Measure When
Data type ci32.png
Permissions Read/Write
High-level VIs N/A
Channel-based Yes
Instrument-based No
Resettable No
Automatically after Source Complete 1025

Acquires a measurement after each Source Complete event completes. Use the niDCPower Fetch Multiple VI to retrieve the measurements.

On Demand 1026

Acquires a measurement when the niDCPower Measure VI or niDCPower Measure Multiple VI is called.

On Measure Trigger 1027

Acquires a measurement when a Measure trigger is received. Use the niDCPower Fetch Multiple VI to retrieve the measurements.