LCR:DC Bias:Source
- Updated2025-10-06
- 1 minute(s) read
Specifies how to apply DC bias for LCR measurements.
Note
This property is not supported by all instruments. Refer to
Supported Properties by Device
for information about supported instruments.
Default Value : Refer to Supported Properties by Device for the default value by instrument.
Remarks
The following table lists the characteristics of this property.
| Short Name | LCR DC Bias Source |
| Data type |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Channel-based | Yes |
| Instrument-based | No |
| Resettable | No |
| Off | 1065 | Disables DC bias in LCR mode. |
| Voltage | 1066 | Applies a constant voltage bias, as defined by the LCR DC Bias Voltage Level property. |
| Current | 1067 | Applies a constant current bias, as defined by the LCR DC Bias Current Level property. |