NIDMM_ATTR_AC_MAX_FREQ
- Updated2023-02-21
- 1 minute(s) read
Specific Attribute
| Data type |
Access | Coercion | High-Level Function |
|---|---|---|---|
| ViReal64 | R/W | Yes | niDMM_ConfigureACBandwidth |
Description
Specifies the maximum frequency component of the input signal for AC measurements. This attribute is used only for error checking and verifies that the value of this parameter is less than the maximum frequency of the device. This attribute affects the DMM only when you set the NIDMM_ATTR_FUNCTION attribute to AC measurements. The valid range is 1 Hz–300 kHz for the NI 4080/4081/4082 and NI 4070/4071/4072 and 10 Hz–100 kHz for the NI 4065.