Configures the frequency range, in Hz, over which the measurement integrates the offset channel power.

Use "offset<n>" as the selector string to configure this VI.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies the selector string comprising of the signal name and offset number. If you do not specify the signal name, the default signal instance is used. The default value is "offset0".

    Example:

    "offset0"

    "signal::sig1/offset0"

    You can use the RFmxSpecAn Build Offset String2 VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • cdbl.png Integration Bandwidth (Hz) —

    Integration Bandwidth specifies the frequency range, in Hz, over which the measurement integrates the offset channel power. The default value is 1 MHz.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference of your RFmx session to the next VI.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.