RFmxEVDO ACP Configure Offset Power Reference VI
- Updated2025-10-13
- 3 minute(s) read
Configures the power reference of the offset channels in multi-carrier setups.

Inputs/Outputs
Selector String
—
Selector String specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. The default value is "" (empty string). Examples: "" "signal::sig1" You can use the RFmxEVDO Build Signal String VI to build the selector string.
Instrument Handle In
—
Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.
Offset Power Reference Carrier
—
Offset Power Reference Carrier specifies how the reference power is selected. The default value is Composite.
For single-carrier configurations, all options have the same behavior.
Offset Power Reference Specific
—
Offset Power Reference Specific specifies the carrier number that is used as power reference. This parameter only applies if you set the Offset Power Reference Carrier parameter to Specific.
error in (no error)
—
error in describes error conditions that occur before this node runs. This input provides standard error in functionality.
Instrument Handle Out
—
Instrument Handle Out passes a reference to your RFmx session to the next VI.
error out
—
error out contains error information. This output provides standard error out functionality. |
Selector String
—
Instrument Handle In
—
Offset Power Reference Carrier
—
error in (no error)
—
Instrument Handle Out
—
error out
—