Specifies the signal to drive the 10 MHz Reference Clock on the PXI backplane. This option can be configured only when the PXI-5600 is installed in Slot 2 of the PXI chassis.

Default Value: N/A

Supported Devices: PXI-5600 (external digitizer mode), PXI-5661

Related Topics

System Reference Clock

Triggers

Events

Remarks

The following table lists the characteristics of this property.

Short Name PXI Chassis Clk10 Source
Data type cstr.png
Permissions Read/Write
High-level VIs niRFSA Configure PXI Chassis Clk10
Channel-based No
Resettable Yes
None None

The device does not drive the PXI 10 MHz backplane Reference Clock.
OnboardClock OnboardClock

The device drives the PXI 10 MHz backplane Reference Clock with the PXI-5600 onboard clock. You must connect the 10 MHz OUT connector to the PXI 10 MHz I/O connector on the PXI-5600 front panel to use this option.
RefIn RefIn

The device drives the PXI 10 MHz backplane Reference Clock with the reference source attached to the PXI-5600 REF IN connector. You must connect the 10 MHz OUT connector to the PXI 10 MHz I/O on the PXI-5600 front panel to use this option.