Controls the frequency of the standard waveform that the signal generator produces.

Units: hertz (Hz)

Default Value: None

Note This parameter does not affect signal generator behavior when you set the Waveform property to NIFGEN_VAL_WFM_DC. For NIFGEN_VAL_WFM_SINE , the range is between 0 MHz and 16 MHz, but the range is between 0 MHz and 1 MHz for all other waveforms.

Remarks

The following table lists the characteristics of this property.

Short Name Frequency
Data type cdbl.png
Permissions Read/Write
High-level VIs niFgen Configure Standard Waveform
Channel-based Yes
Resettable No