Specifying An IP Address
- Updated2023-02-20
- 1 minute(s) read
Specifying An IP Address
You can specify an IP address for the WTS instrument using DHCP (default) or a fixed IP.
- DHCP (left Ethernet port)
- Fixed IP (right Ethernet port)—The default IP address is
192.168.0.10.
Note Check with your network administrator if you want to add the WTS to an existing network.
- Open then click Change Adapter Settings.
- Select the Ethernet connection to which to assign the IP address.
- Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
- Specify the IP address and click OK.