NI Video Measurement Suite

NI VMS Analyzer Setup Panel Interface

  • Updated2023-08-17
  • 1 minute(s) read

NI VMS Analyzer Setup Panel Interface

The main interface for NI VMS in TestStand is referred to as the "NI VMS Analyzer Setup panel."

This panel's appearance and function is very similar to the standalone version of NI VMS, but includes additional controls.

Opening the NI VMS Analyzer Setup panel

You can access the NI VMS Analyzer Setup panel from NI TestStand by dropping an NI VMS Analyzer Setup step in an NI TestStand sequence, then right-clicking on it and selecting Edit Analyzer. Refer to Figure 1.

Figure 1: Configure NI VMS Analyzer Setup panel from NI TestStand

When selecting Edit Analyzer, the NI VMS Analyzer Setup panel will open.

In figure 3, the controls exposed on each tab of the NI VMS Analyzer Setup panel are shown.

Figure 3: NI VMS Analyzer Setup panel Tabs.

From left to right in the above figure, the tabs are named as follows:

  • File tab
  • Acquisition tab
  • Analysis tab
  • Sequencer tab
  • Filter tab

Log in to get a better experience