Function Generator Calibration
- Updated2023-09-07
- 1 minute(s) read
Function Generator Calibration
Owning Palette: Mixed Signal Oscilloscope UtilitiesInstalled With: NI-VirtualBench application development support
Use the Function Generator Calibration VIs and functions to perform internal and external calibration of devices.
| Palette Object | Description |
|---|---|
| FGEN Get Calibration Adjustment Information |
Returns instrument information from the last successful calibration adjustment. |
| FGEN Initialize Calibration |
Opens a calibration session with the instrument. The instrument is reset upon successful completion of this VI. This VI returns an error if the instrument is reserved or if Password is incorrect. |
| FGEN Close Calibration |
Closes the calibration session, then resets the device. |
| FGEN Setup Offset Calibration |
Configures the instrument to output the offset values of the function generator. |
| FGEN Adjust Offset Calibration |
Stores a measured reference value to the instrument and associates that value with the adjustment point and filter values previously configured with FGEN Setup Offset Calibration. You must run FGEN Setup Offset Calibration prior to running this VI. |
| FGEN Get Gain Calibration Adjustment Points |
Returns the adjustment points and filter configurations needed to sweep the instrument for adjustment. |
| FGEN Setup Gain Calibration |
Configures the instrument to output the values returned by FGEN Get Calibration Adjustment Points. |
| FGEN Adjust Gain Calibration |
Stores a measured reference value to the instrument and associates that value with the adjustment point and filter values previously configured with FGEN Setup Gain Calibration. You must run FGEN Setup Gain Calibration prior to running this VI. |