Static Data Viewer Environment

The Static Data Viewer is hosted on the SystemLink Web Application.

Note Refer to Commissioning a System from the Static Structural Test Reference Architecture for more information about configuring the Static Data Viewer for first use.
Figure 11. Static Data Viewer Environment

1378

  1. Home
  2. Saved Graphs
  3. Saved Alarm Rules
  4. Launch New Graph
  5. Alarms
  6. Note

Home

The Home page provides a full list of the channels that are configured in the test system. Use this page to select channels, configure alarm thresholds for specific channels, view alarms, and add notes to the log file. Refer to the following list for more information about each control on the Home page.

  • Channel Filter—Search for the specific channel(s) that you are interested in viewing. The search filter is case sensitive.
  • Channel List—Select the channel of interest from the Channel List. The total number of channels configured in the test system appear in the Total Channels field.
  • Data Table—View expanded channel information on channels you selected from the Channel List. Use the controls in the Data Table to configure and enable alarms and view the live data for multiple channels, as outlined in Configuring Alarms and Viewing Channel Data.

    • Launch New Graph

    Open a graph in a separate browser tab to view the live values for specified channels in detail. Refer to Viewing Channel Data for more information.

    Alarms

    View alarm instances of a specific channel. If the alarm rules configured in the Data Table are met, an alarm is triggered and all alarm instances are displayed in the Alarms list until cleared. Clear the Alarm Enabled checkbox on a channel in the Data Table to disable the alarm rule for that channel. Refer to Configuring Alarms for more information about clearing and acknowledging alarms.

    Tip Press <Ctrl> to select multiple alarms from Alarms to launch or delete at the same time.

    Note

    Enter comments in the Note field. The comments are added to the test log file and include your username and a timestamp.

    Tip The channel name is not automatically recorded in comments, so include the channel name in the comments as necessary.

    Saved Graphs

    The Saved Graphs page displays a list of all graphs that you launched from the Home page. Refer to the following list for more information about the controls on the Saved Graphs page.

  • Launch—Click to open an existing graph in a new browser tab.
  • Delete—Click to remove a graph.
    • Tip Press <Ctrl> to select multiple graphs from Graphs to launch or delete at the same time.

    Saved Alarm Rules

    The Saved Alarm Rules page displays all Alarm Rules that you have configured on the Home page and whether the alarm is enabled or disabled. Click Delete to delete and clear alarm rules for a specified channel. When you delete an alarm rule, the alarm values that you configured for the specific channel in the Data Table on the Home page return to the default settings.