Launching the BIOS Setup Utility for BIOS with DisplayPort

Complete the following steps to launch the BIOS setup utility.
  1. Connect a video monitor to the USB 3.1 Type-C DisplayPort connector on the sbRIO-96xx.
    Note In order to connect the monitor to the USB 3.1 Type-C DisplayPort connector, you may need to use a VGA-to-Type-C or DVI-to-Type-C adapter.
  2. Connect a USB keyboard to the USB 2.0 host port on the sbRIO-96xx.
  3. Power on or reboot the sbRIO-96xx.
  4. Hold down either the <F10> key or the <Del> key until Please select boot device: appears onscreen.
  5. Use the Down Arrow key to select Enter Setup and press <Enter>. The setup utility loads after a short delay.
The Main setup menu is displayed when you first enter the BIOS setup utility.