CompactRIO Single-Board Controller Concepts
- Updated2023-10-23
- 3 minute(s) read
CompactRIO Single-Board Controller Concepts
| Term | Definition |
|---|---|
| Connector0 | Connector0 refers to the MIO connector on the sbRIO-9628, sbRIO-9629, and sbRIO-9638. |
| Connector1 | Connector1 refers to the DIO connector on the sbRIO-9638. |
| sbRIO-960x | In this document, sbRIO-960x refers exclusively to the following CompactRIO single-board controllers with NI-DAQmx: sbRIO-9603, sbRIO-9608, and sbRIO-9609. |
| sbRIO-962x/sbRIO-963x | In this document, sbRIO-962x/sbRIO-963x refers exclusively to the following CompactRIO single-board controllers with NI-DAQmx: sbRIO-9628, sbRIO-9629, and sbRIO-9638. |
| sbRIO-96xx | In this document, sbRIO-96xx refers exclusively to the CompactRIO single-board controllers with NI-DAQmx. |
| C Series Module | C Series Module refers to any board-only C Series module designed for implementation in an sbRIO system. |
| Onboard I/O Module | Onboard module refers to the distinct onboard modules designed into the sbRIO-96xx. |
| sbRIO I/O Module | In this document, sbRIO I/O module refers to both onboard modules and C Series modules. |
| Term | Definition |
|---|---|
| RMC connector | 240-pin, 40 × 6 position, high-density open pin field SEARAY on the sbRIO device. |
| SEARAY | Connector family used for the RMC connector on the sbRIO device. Manufactured by Samtec. |
| SoC | System on Chip. |
| USB Host | USB interface that controls the bus and communicates with connected USB devices. |
| LVTTL | In compliance with the Low-Voltage Transistor-Transistor Logic (LVTTL) specification. |
| LVCMOS | In compliance with the Low-Voltage Complementary Metal Oxide Semiconductor (LVCMOS) specification. |
| LVDS | In compliance with the Low-Voltage Differential Signalling (LVDS) specification. |
| Element | Definition |
|---|---|
|
|
Off-page symbol that represents communication to and from the mating connector. |
|
|
Off-page symbol that represents communication from the mating connector. |
|
|
Off-page symbol that represents communication to the mating connector. |
|
|
On-page symbol that represents the signal being driven. |
|
|
On-page symbol that represents the signal being received. |
|
|
Power supply rail. |
|
|
Analog ground. |
|
|
Digital ground. |
|
|
Chassis ground. |
| SPARE | Refers to an unpopulated reference designator. |