Enables or disables RF blanking.

RF Blanking Source RF Blanking Behaviour
"" (empty string) Disable No blanking performed.
"" (empty string) Enable Blanking performed based on burst start and stop values and blanking source set to private marker.
marker0, marker1, marker2, or marker3 Disable Blanking performed based on the marker locations for the marker that the user set in the blanking source.
marker0, marker1, marker2, or marker3 Enable Error is shown.

Supported Devices: PXIe-5820/5830/5831/5832/5840/5841/5842

Note For PXIe-5830/5831/5832, the RF Blanking reserves a PXI trigger line. If you are calling any niRFSG Reset or niRFSA Reset on the same device, NI recommends calling it before committing blanking properties. Alternatively, you can call niRFSG Reset With Options or niRFSA Reset With Options. Select Routes in the steps to omit parameter.

Default Values: Disabled

Remarks

The following table lists the characteristics of this property.

Short Name Waveform RF Blanking
Data type ci32.png
Permissions Read/Write
High-level VIs N/A
Channel-based Yes
Resettable Yes
Disable 0

RF blanking is disabled.
Enable 1

RF blanking is enabled.