Specifies the connector(s) to use to generate the signal. To set this property, the NI-RFSG device must be in the Configuration state.

You must write complex I and Q data for all options. The Q data has no effect if you set this property to I Only and set the IQ Out Port Carrier Frequency property to 0. If you set the IQ Out Port Carrier Frequency property to a value other than 0, the onboard signal processing (OSP) frequency shifts I and Q as a complex value and outputs the real portion of the result on the I connector(s) of the device.

If you set the Output Port property to I Only or IQ Out, the IQ Out Port Terminal Configuration property applies.

Supported Devices: PXIe-5644/5645/5646, PXIe-5820/5830/5831/5832/5840/5841/5842/5860

Default Values:

PXIe-5644/5645/5646, PXIe-5830/5831/5832/5840/5841/5842/5860: RF Out

PXIe-5820: IQ Out

Remarks

The following table lists the characteristics of this property.

Short Name Output Port
Data type ci32.png
Permissions Read/Write
High-level VIs N/A
Channel-based No
Resettable Yes
RF Out 14000

Enables the RF OUT port. This value is not valid for the PXIe-5820.
IQ Out 14001

Enables the I/Q OUT port. This value is valid on only the PXIe-5645 and PXIe-5820.
Cal Out 14002

Enables the CAL OUT port.
I Only 14003

Enables the I connectors of the I/Q OUT port. This value is valid on only the PXIe-5645.