Specifies the destination terminal for exporting the Pulse Modulation Event. The Pulse Modulation Event tracks the RF Envelope when Pulse Modulation is Enabled. If this property is set to a value other than `NIRFSG_VAL_DO_NOT_EXPORT_STR`, calling NI-RFSG Commit will cause the output terminal to be pulled to the logic level that is the inverse of `NIRFSG_ATTR_EXPORTED_PULSE_MODULATION_EVENT_ACTIVE_LEVEL`. You can tri-state this terminal by setting this property to `NIRFSG_VAL_DO_NOT_EXPORT_STR` or by calling `niRFSG Reset`. To set this property, the NI-RFSG device must be in the Configuration state.

Supported Devices: PXIe-5842

Default Value: PulseOut

Remarks

The following table lists the characteristics of this property.

Short Name Exported Pulse Modulation Event Output Terminal
Data type cstr.png
Permissions Read/Write
High-level VIs N/A
Channel-based Yes
Resettable Yes
Do not export signal

Do not export the pulse video signal.
PulseOut PulseOut

Export the pulse video signal to the pulse out terminal.