Use the NI PXIe-5654 Calibration VIs to calibrate your PXIe-5654 device. Refer to the calibration procedure for your device for more information about device calibration.

niRFSG 5654 Power Cal Initialize VI
Prepares the device for calibrating the power.
niRFSG 5654 Power Cal Configure VI
Configures the PXIe-5654 for the next power calibration point and waits for the output signal to settle.
niRFSG 5654 Power Cal Adjust VI
Calculates calibration information pertaining to the RF output power on the PXIe-5654. This calculation is based on user-supplied measurements. The calibration information is stored in the driver session, and you can later write this information to the device.
niRFSG 5654 OCXO Cal Initialize VI
Prepares the device for calibrating the 100 MHz oven-controlled crystal oscillator (OCXO) reference.
niRFSG 5654 OCXO Cal Configure VI
Configures the PXIe-5654 with specific settings for calibrating the 100 MHz oven-controlled crystal oscillator (OCXO) reference.
niRFSG 5654 OCXO Cal Adjust VI
Calculates calibration information pertaining to the 100 MHz oven-controlled crystal oscillator (OCXO) reference of the PXIe-5654. This calculation is based on user-supplied measurements. The calibration information is stored in the driver session, and you can later write this information to the device.

Parent topic: External Calibration

NI-RFSG LabVIEW VI Reference