Fetches the RU offset and the RU size of the specified user.

Use "user<n>" as the selector string to read results from this VI.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name, result name, and user number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "user0".

    Example:

    "user0"

    "signal::sig1/user0"

    "signal::sig1/result::r1/user0"

    "result::r1/user0"

    You can use the RFmxWLAN Build User String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI or the RFmxInstr Initialize NIRFSA (Array) VI.

  • cdbl.png Timeout (s) —

    Timeout specifies the timeout for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. This value is expressed in seconds. The default value is 10.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference of your RFmx session to the next VI.

  • ii32.png RU Offset —

    RU Offset returns the location of RU for the specified user in terms of the index of a 26-tone RU, assuming the entire bandwidth is composed of 26-tone RUs.

  • ii32.png RU Size —

    RU Size returns the RU size for the specified user.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.