Fetches the 10% point of the complementary cumulative distribution function (CCDF) of frequency error across the number of iterations.

Use "segment<n>" as the selector string to read results from this VI.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name, result name, and segment number. If you do not specify the signal name, the default signal instance is used. The default value is "segment0".

    Example:

    "segment0"

    "signal::sig1/segment0"

    "result::r1/segment0"

    "signal::sig1/result::r1/segment0"

    You can use the RFmxWLAN Build Segment String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI or the RFmxInstr Initialize NIRFSA (Array) VI.

  • cdbl.png Timeout (s) —

    Timeout specifies the timeout for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. This value is expressed in seconds. The default value is 10.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference of your RFmx session to the next VI.

  • idbl.png Frequency Error CCDF 10% (Hz) —

    Frequency Error CCDF 10% returns the 10% point of the CCDF of absolute frequency error. When you set the OFDMModAcc Averaging Enabled property to True, the CCDF is computed over each averaging count. This value is expressed in Hz.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.