SEM:Offset:Sideband
- Updated2025-10-13
- 1 minute(s) read
Specifies whether the offset segment is present on one side or on both sides of the carrier.
Use "offset<n>" as the selector string to configure this property.
The default value is Both.
Remarks
The following table lists the characteristics of this property.
| Short Name | SEM Offset Sideband |
| Data type |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | Yes |
| Neg | 0 | Configures a lower offset segment to the left of the carrier. |
| Pos | 1 | Configures an upper offset segment to the right of the carrier. |
| Both | 2 | Configures both negative and positive offset segments. |