Specifies the reference level coercion limit for noise compensation. This value is expressed in dB.

When you set the OFDMModAcc Noise Comp Enabled property to True and the OFDMModAcc Meas Mode property to Measure, the measurement attempts to read the noise floor calibration data corresponding to the configured reference level. If the noise floor calibration data corresponding to the configured reference level in the calibration database is not found, then the measurement attempts to read noise floor calibration data from the calibration database for any reference level in the range of the configured reference level plus or minus the coercion limit you set for this property.

You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.

The default value is 0.5.

Remarks

The following table lists the characteristics of this property.

Short Name OFDMModAcc Noise Comp Ref Level Coercion Limit (dB)
Data type cdbl.png
Permissions Read/Write
High-level VIs N/A
Resettable Yes