OFDM:Number of Receive Chains
- Updated2025-10-13
- 1 minute(s) read
Specifies the number of receive chains for OFDM standards.
You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.
The default value is 1.
The valid values are as follows.
| Standard | Number of Receive Chains |
|---|---|
| 802.11a/g, 802.11j, 802.11p | 1 |
| 802.11n | 1–4 |
| 802.11ac, 802.11ax, 802.11be | 1–8 |
Remarks
The following table lists the characteristics of this property.
| Short Name | Num Rx Chains |
| Data type |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | Yes |