Performs the enabled measurements on the spectrum that you specify in the spectrum parameter. Call this method after you configure the signal and measurement methods. You can fetch measurement results using the Fetch methods or result methods in the property node. Use this method only if the Recommended Acquisition Type method value is either spectral or IQorSpectral .
Query the Recommended Acquisition Type method from the RFmxInstr Property Node after calling the RFmxWLAN Commit method.

Syntax

Namespace: NationalInstruments.RFmx.WlanMX

public int AnalyzeSpectrum1Waveform(string selectorString, string resultName, Spectrum< float > spectrum, bool reset, long reserved)

Parameters

NameTypeDescription
selectorStringstring

Specifies the result name. The result name can either be specified through this input or the resultName parameter. If you do not specify the result name in this parameter, either the result name specified by the resultName parameter or the default result instance is used. Example:
""
""
"result::r1"
You can use the BuildResultString(string) method to build the selector string .

resultNamestring

Specifies the name to be associated with measurement results. Provide a unique name, such as "r1" to enable fetching of multiple measurement results and traces. This input accepts the result name with or without the "result::" prefix. Example:
"result::r1"
"r1"

spectrumSpectrum< float >

Specifies the data for a spectrum waveform including the start, delta, and actual values.

resetbool

Resets measurement averaging. If you enable averaging, set this parameter to TRUE for first record and FALSE for subsequent records.

reservedlong

Reserved for future use. Any value passed to this parameter will be ignored.

Returns

Returns the status code of this method. The status code either indicates success or describes a warning condition.