Fetches the relative powers trace for the ACP measurement.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name and result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "" (empty string).

    Example:

    "signal::sig1"

    "result::r1"

    "signal::sig1/result::r1"

    You can use the RFmxWCDMA Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • cdbl.png Timeout (s) —

    Timeout specifies the time for which the VI waits for the measurement to complete. This value is expressed in seconds. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your RFmx session to the next VI.

  • i1dcclst.png Relative Powers (dB) —

    Relative Powers returns the trace of relative power values measured in each channel relative to the power reference carrier. This value is expressed in dB.

  • idbl.png x0 —

    x0 returns the start frequency. This value is expressed in Hz.

  • idbl.png dx —

    dx returns the frequency bin spacing. This value is expressed in Hz.

  • i1dsgl.png y —

    y returns the relative power with reference to the power reference carrier property. The value is expressed in dB.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.