Waves:Receiver Port

Specifies the receiver port name for wave measurement.

Incident and scattered waves are denoted by "a_<receiver port name>_<source port name>" and "b_<receiver port name>_<source port name>" respectively. On a receiver port, the a and b waves are measured using Reference receiver and Test receiver respectively.

For example, to measure "b21", set Waves Receiver to Test (0), set this property to "port2" and Waves Source Port to "port1".

Use "wave<n>" as the selector string to configure or read this property.

The default value is "port1".

Remarks

The following table lists the characteristics of this property.

Short Name	Waves Receiver Port
Data type
Permissions	Read/Write
High-level VIs	N/A
Resettable	Yes