Specifies the time for which the analyzer waits before acquiring the signal for each measurement point. Use dwell time when measuring devices with substantial electrical lengths, requiring compensation for the delay between frequency changes at the generator and their observation at the analyzer. This value is expressed in seconds.

You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.

The default value is 0 s.

Remarks

The following table lists the characteristics of this property.

Short Name Dwell Time (s)
Data type cdbl.png
Permissions Read/Write
High-level VIs N/A
Resettable Yes