Groups

Group members

NameDescription
RFMXVNA_ATTR_NUMBER_OF_SEGMENTS

Specifies the number of sweep segments. This attribute is used only when you set RFMXVNA_ATTR_SWEEP_TYPE attribute to Segment

RFMXVNA_ATTR_SEGMENT_DWELL_TIME

Specifies the dwell time for the selected segment. This attribute is used only when you set the RFMXVNA_ATTR_SWEEP_TYPE attribute to Segment and RFMXVNA_ATTR_SEGMENT_DWELL_TIME_ENABLED attribute to True. This value is expressed in seconds.

RFMXVNA_ATTR_SEGMENT_DWELL_TIME_ENABLED

Specifies whether VNA performs measurements using the same dwell time value for all segments or uses different dwell time for each segment. This attribute is used only when you set the RFMXVNA_ATTR_SWEEP_TYPE attribute to Segment.

RFMXVNA_ATTR_SEGMENT_ENABLED

Specifies whether to enable the selected segment for the sweep. This attribute is used only when you set RFMXVNA_ATTR_SWEEP_TYPE attribute to Segment

RFMXVNA_ATTR_SEGMENT_IF_BANDWIDTH

Specifies the digital IF filter bandwidth for the selected segment. This attribute is used only when you set the RFMXVNA_ATTR_SWEEP_TYPE attribute to Segment and RFMXVNA_ATTR_SEGMENT_IF_BANDWIDTH_ENABLED attribute to True. This value is expressed in Hz.

RFMXVNA_ATTR_SEGMENT_IF_BANDWIDTH_ENABLED

Specifies whether VNA performs measurements using the same digital IF filter bandwidth for all segments or uses different digital IF filter bandwidth for each segment. This attribute is used only when you set the RFMXVNA_ATTR_SWEEP_TYPE attribute to Segment.

RFMXVNA_ATTR_SEGMENT_POWER_LEVEL

Specifies the source power level for the selected segment. This attribute is used only when you set the RFMXVNA_ATTR_SWEEP_TYPE attribute to Segment and RFMXVNA_ATTR_SEGMENT_POWER_LEVEL_ENABLED attribute to True. This value is expressed in dBm.

RFMXVNA_ATTR_SEGMENT_POWER_LEVEL_ENABLED

Specifies whether VNA performs measurements using the same source power level for all segments or uses different source power level for each segment. This attribute is used only when you set the RFMXVNA_ATTR_SWEEP_TYPE attribute to Segment.

RFMXVNA_ATTR_SEGMENT_TEST_RECEIVER_ATTENUATION

Specifies the test receiver attenuation for the selected segment. This attribute is used only when you set the RFMXVNA_ATTR_SWEEP_TYPE attribute to Segment and RFMXVNA_ATTR_SEGMENT_TEST_RECEIVER_ATTENUATION_ENABLED attribute to True. This value is expressed in dB.

RFMXVNA_ATTR_SEGMENT_TEST_RECEIVER_ATTENUATION_ENABLED

Specifies whether VNA performs measurements using the same test receiver attenuation for all segments or uses different test receiver attenuation for each segment. This attribute is used only when you set the RFMXVNA_ATTR_SWEEP_TYPE attribute to Segment.

Attachments

None