Returns the detected channels. If you set the Channel Configuration Mode property to User Defined, the measurement returns the configured channels. If the averaging is enabled, this VI returns the array of detected channels of the last averaging iteration.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name and result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "" (empty string).

    Examples:

    ""

    "signal::sig1"

    "result::r1"

    "signal::sig1/result::r1"

    You can use the RFmxTDSCDMA Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • cdbl.png Timeout (s) —

    Timeout specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • i1di32.png Detected Channelization Code —

    Detected Channelization Code returns an array of channelization code numbers for the detected channels.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your RFmx session to the next VI.

  • i1di32.png Detected Slot Index —

    Detected Slot Index returns an array of slot indexes of the detected channels.

  • i1di32.png Detected Spreading Factor —

    Detected Spreading Factor returns an array of spreading factors of the detected channels.

  • i1di32.png Detected Modulation Type —

    Detected Modulation Type returns an array of the modulation types for the detected channels.

    QPSK (0) The modulation type is QPSK.
    8PSK (1) The modulation type is 8-PSK.
    16QAM (2) The modulation type is 16-QAM.
  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.