RFmxTDSCDMA ModAcc Fetch Data RCDE VI

Selector String specifies a selector string comprising of the signal name and result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "" (empty string).

Examples:

""

"signal::sig1"

"result::r1"

"signal::sig1/result::r1"

You can use the RFmxTDSCDMA Build Signal String VI to build the selector string.

Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

Timeout specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

Instrument Handle Out passes a reference to your RFmx session to the next VI.

Maximum Peak Data RCDE returns the maximum value of the peak RDCEs among all active time slots and averaging iterations. This value is expressed in dB.

RFmx calculates the RCDEs by projecting the descrambled error vector onto the codes of each active channel. The RCDE is the ratio of the mean power of the projection onto that code to the mean power of the corresponding active channel in the reference waveform.

Peak Data RCDE Spreading Factor returns the spreading factor of the channel corresponding to the value of the ModAcc Results Pk Data RCDE property.

Peak Data RCDE Code returns the channelization code of the channel corresponding to the value of the ModAcc Results Pk Data RCDE Code property.

error out contains error information. This output provides standard error out functionality.