Indicates the overall SEM measurement status based on the measurement limits and the fail criteria that you set in the SEM Offset Seg Limit Fail Mask property for each offset segment.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name and result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "" (empty string).

    Example:

    ""

    "signal::sig1"

    "result::r1"

    "signal::sig1/result::r1"

    You can use the RFmxSpecAn Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • cdbl.png Timeout (s) —

    Timeout specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference of your RFmx session to the next VI.

  • ii32.png Composite Measurement Status —

    Composite Measurement Status indicates the overall measurement status based on the measurement limits and the fail criteria that you set in the SEM Offset Seg Limit Fail Mask property for each offset segment.

    Fail (0)

    The measurement has failed.
    Pass (1)

    The measurement has passed.
  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.