Enables all the measurements that you specify in the Measurements parameter and disables all other measurements.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. The default value is "" (empty string).

    Example:

    ""

    "signal::sig1"

    You can use the RFmxSpecAn Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • c1denum.png Measurements —

    Measurements specifies the measurement to perform. You can specify one or more of the following measurements. The default is an empty array.

    ACP (0)

    Enables ACP measurement.
    CCDF (1)

    Enables CCDF measurement.
    CHP (2)

    Enables CHP measurement.
    FCnt (3)

    Enables FCnt measurement.
    Harmonics (4)

    Enables harmonics measurement.
    OBW (5)

    Enables OBW measurement.
    SEM (6)

    Enables SEM measurement.
    Spectrum (7)

    Enables spectrum measurement.
    Spur (8)

    Enables spurious emissions (Spur) measurement.
    TXP (9)

    Enables TXP measurement.
    AMPM (10)

    Enables AMPM measurement.
    DPD (11)

    Enables DPD measurement.
    IQ (12)

    Enables I/Q measurement.
    IM (13)

    Enables IM measurement.
    NF (14)

    Enables NF measurement.
    PhaseNoise (15)

    Enables phase noise measurement.
    PAVT (16)

    Enables PAVT measurement.
  • cbool.png Enable All Traces —

    Enable All Traces specifies whether to enable all traces for the selected measurement. The default value is FALSE.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference of your RFmx session to the next VI.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.