RFmxSpecAn IM Fetch Intercept Power VI

Selector String specifies a selector string comprising of the signal name, result name, and intermod number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used.

Example:

"intermod0"

"signal::sig1/intermod0"

"result::r1/intermod0"

"signal::sig1/result::r1/intermod0"

You can use the RFmxSpecAn Build Intermod String VI to build the selector string.

Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

Timeout specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

Upper Output Intercept Power returns the upper output intercept power. This value is expressed in dBm.

Lower Output Intercept Power returns the lower output intercept power. This value is expressed in dBm.

Instrument Handle Out passes a reference of your RFmx session to the next VI.

Intermod Order returns the order of the intermod.

Worst Case Output Intercept Power returns the worst case output intercept power which is equal to the minimum of the values of the IM Results Upper Output Intercept Power and IM Results Lower Output Intercept Power results. This value is expressed in dBm.

error out contains error information. This output provides standard error out functionality.