Fetches the reference waveform used to perform the IDPD measurement.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. The default value is "" (empty string).

    Example:

    ""

    "signal::sig1"

    You can use the RFmxSpecAn Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • cdbl.png Timeout (s) —

    Timeout specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference of your RFmx session to the next VI.

  • icclst.png Processed Reference Waveform —

    Processed Reference Waveform returns the segment of the reference waveform used to perform the measurement.

  • idbl.png x0 —

    x0 returns the start time, in seconds.

  • idbl.png dx —

    dx returns the sample duration, in seconds.

  • i1dcsg.png y —

    y returns the complex baseband samples, in volts.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.