RFmxSpecAn CCDF Fetch Basic Power Probabilities VI

Selector String specifies a selector string comprising of the signal name and result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "" (empty string).

Example:

""

"signal::sig1"

"result::r1"

"signal::sig1/result::r1"

You can use the RFmxSpecAn Build Signal String VI to build the selector string.

Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

Timeout specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

0.001% Power returns the power, in dB, above the mean power, over which 0.001% of the total samples in the signal are present.

0.01% Power returns the power, in dB, above the mean power, over which 0.01% of the total samples in the signal are present.

Instrument Handle Out passes a reference of your RFmx session to the next VI.

10% Power returns the power, in dB, above the mean power, over which 10% of the total samples in the signal are present.

1% Power returns the power, in dB, above the mean power, over which 1% of the total samples in the signal are present.

0.1% Power returns the power, in dB, above the mean power, over which 0.1% of the total samples in the signal are present.

error out contains error information. This output provides standard error out functionality.

0.0001% Power returns the power, in dB, above the mean power, over which 0.0001% of the total samples in the signal are present.