Configures the frequency range, in Hz, over which the measurement integrates the carrier power.

Use "carrier<n>" as the selector string to configure this VI.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name and carrier number. If you do not specify the signal name, the default signal instance is used. The default value is "carrier0".

    Example:

    "carrier0"

    "signal::sig1/carrier0"

    You can use the RFmxSpecAn Build Carrier String2 VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • cdbl.png Integration Bandwidth (Hz) —

    Integration Bandwidth specifies the frequency range, in Hz, over which the measurement integrates the carrier channel power. The default value is 1 MHz.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference of your RFmx session to the next VI.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.