Specifies an array of frequencies corresponding to the ohmic losses between the source and the input port of the analyzer. This value is expressed in Hz. This property is applicable only when you set the NF Y-Factor Mode property to Calibrate and set the NF Meas Method property to Y-Factor, or when you set the NF Cold Source Mode property to Calibrate and set the NF Meas Method property to Cold Source.

You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.

The default value is an empty array.

Remarks

The following table lists the characteristics of this property.

Short Name NF Cal Loss Freq (Hz)
Data type c1ddbl.png
Permissions Read/Write
High-level VIs N/A
Resettable Yes