SEM:Offset:Limit Fail Mask
- Updated2025-10-13
- 1 minute(s) read
Specifies the criteria to determine the measurement fail status.
Use "offset<n>" as the selector string to configure or read this property.
The default value is Absolute.
Remarks
The following table lists the characteristics of this property.
| Short Name | SEM Offset Limit Fail Mask |
| Data type |  |
| Permissions | Read/Write |
| High-level VIs | RFmxSpecAn SEM Configure Offset Limit Fail Mask |
| Resettable | Yes |
| Abs AND Rel | 0 | The measurement fails if the power in the segment exceeds both the absolute and relative masks. |
| Abs OR Rel | 1 | The measurement fails if the power in the segment exceeds either the absolute or relative mask. |
| Absolute | 2 | The measurement fails if the power in the segment exceeds the absolute mask. |
| Relative | 3 | The measurement fails if the power in the segment exceeds the relative mask. |