Spectrum
- Updated2025-04-08
- 1 minute(s) read
Groups
Group members
| Name | Description |
|---|---|
| RFMXSPECAN_ATTR_SPECTRUM_AMPLITUDE_CORRECTION_TYPE | Specifies whether the amplitude of the frequency bins, used in the measurement, is corrected for external attenuation at the RF center frequency, or at the individual frequency bins. Use the RFmxInstr Configure External Attenuation Table function to configure the external attenuation table. |
| RFMXSPECAN_ATTR_SPECTRUM_ANALYSIS_INPUT | Specifies whether to analyze just the real I or Q component of the acquired IQ data, or analyze the complex IQ data. |
| RFMXSPECAN_ATTR_SPECTRUM_MEASUREMENT_ENABLED | Specifies whether to enable the spectrum measurement. |
| RFMXSPECAN_ATTR_SPECTRUM_MEASUREMENT_METHOD | Specifies the method for performing the Spectrum measurement. |
| RFMXSPECAN_ATTR_SPECTRUM_MEASUREMENT_MODE | Specifies whether the measurement calibrates the noise floor of analyzer or performs the spectrum measurement. Refer to the measurement guidelines section in the Noise Compensation Algorithm topic for more information. |
| RFMXSPECAN_ATTR_SPECTRUM_NUMBER_OF_ANALYSIS_THREADS | Specifies the maximum number of threads used for parallelism for spectrum measurement. |
| RFMXSPECAN_ATTR_SPECTRUM_POWER_UNITS | Specifies the units for the absolute power. |
| RFMXSPECAN_ATTR_SPECTRUM_SPAN | Specifies the frequency range around the center frequency, to acquire for the measurement. This value is expressed in Hz. |
Attachments
None