PAVT
- Updated2025-04-08
- 2 minute(s) read
Groups
Group members
| Name | Description |
|---|---|
| RFMXSPECAN_ATTR_PAVT_ALL_TRACES_ENABLED | Specifies whether to enable the traces to be stored and retrieved after performing the PAVT measurement. |
| RFMXSPECAN_ATTR_PAVT_FREQUENCY_OFFSET_CORRECTION_ENABLED | Specifies whether to enable frequency offset correction for the measurement. |
| RFMXSPECAN_ATTR_PAVT_FREQUENCY_TRACKING_ENABLED | Specifies whether to enable frequency offset correction per segment for the measurement. While you set this attribute to True, ensure that the RFMXSPECAN_ATTR_PAVT_FREQUENCY_OFFSET_CORRECTION_ENABLED attribute is set to True and the RFMXSPECAN_ATTR_PAVT_SEGMENT_TYPE attribute is set to Phase and Amplitude. |
| RFMXSPECAN_ATTR_PAVT_MEASUREMENT_BANDWIDTH | Specifies the bandwidth over which the signal is measured. This value is expressed in Hz. |
| RFMXSPECAN_ATTR_PAVT_MEASUREMENT_ENABLED | Specifies whether to enable the Phase Amplitude Versus Time (PAVT) measurement. |
| RFMXSPECAN_ATTR_PAVT_MEASUREMENT_INTERVAL_MODE | Specifies the mode of configuring the measurement interval. |
| RFMXSPECAN_ATTR_PAVT_MEASUREMENT_LENGTH | Specifies the duration within the segment over which the phase and amplitude, amplitude, or frequency error values are computed. This value is expressed in seconds. This attribute is valid only when you set the RFMXSPECAN_ATTR_PAVT_MEASUREMENT_INTERVAL_MODE attribute to Uniform. |
| RFMXSPECAN_ATTR_PAVT_MEASUREMENT_LOCATION_TYPE | Specifies whether the location at which the segment is measured is indicated by time or trigger. |
| RFMXSPECAN_ATTR_PAVT_MEASUREMENT_OFFSET | Specifies the time offset from the start of the segment for which the phase and amplitude, amplitude, or frequency error values are computed. This value is expressed in seconds. This attribute is valid only when you set the RFMXSPECAN_ATTR_PAVT_MEASUREMENT_INTERVAL_MODE attribute to Uniform. |
| RFMXSPECAN_ATTR_PAVT_NUMBER_OF_SEGMENTS | Specifies the number of segments to be measured. |
| RFMXSPECAN_ATTR_PAVT_PHASE_UNWRAP_ENABLED | Specifies whether the phase measurement results are unwrapped or wrapped. |
| RFMXSPECAN_ATTR_PAVT_SEGMENT_MEASUREMENT_LENGTH | Specifies the duration within each segment over which the phase and amplitude, amplitude, or frequency error values are computed. This value is expressed in seconds. This attribute is valid when you set the RFMXSPECAN_ATTR_PAVT_MEASUREMENT_INTERVAL_MODE attribute to Variable. |
| RFMXSPECAN_ATTR_PAVT_SEGMENT_MEASUREMENT_OFFSET | Specifies the time offset from the start of the segment for which the phase and amplitude, amplitude, or frequency error values are computed. This value is expressed in seconds. This attribute is valid only when you set the RFMXSPECAN_ATTR_PAVT_MEASUREMENT_INTERVAL_MODE attribute to Variable. |
| RFMXSPECAN_ATTR_PAVT_SEGMENT_START_TIME | Specifies the start time of measurement of the segments. This value is expressed in seconds. You can use this attribute only when you set the RFMXSPECAN_ATTR_PAVT_MEASUREMENT_LOCATION_TYPE attribute to Time. |
| RFMXSPECAN_ATTR_PAVT_SEGMENT_TYPE | Specifies the type of segment. |
Attachments
None