IM
- Updated2025-10-13
- 1 minute(s) read
Groups
Group members
| Name | Description |
|---|---|
| RFMXSPECAN_ATTR_IM_ALL_TRACES_ENABLED | Specifies whether to enable the traces to be stored and retrieved after performing the IM measurement. |
| RFMXSPECAN_ATTR_IM_AMPLITUDE_CORRECTION_TYPE | Specifies whether the amplitude of the frequency bins, used in the measurement, is corrected for external attenuation at the RF center frequency, or at the individual frequency bins. Use the RFmxInstr Configure External Attenuation Table function to configure the external attenuation table. |
| RFMXSPECAN_ATTR_IM_AUTO_INTERMODS_SETUP_ENABLED | Specifies whether the measurement computes the intermod frequencies or uses user-specified frequencies. |
| RFMXSPECAN_ATTR_IM_FREQUENCY_DEFINITION | Specifies whether the tones and intermod frequencies are relative to the RF RFMXSPECAN_ATTR_CENTER_FREQUENCY, or are absolute frequencies. |
| RFMXSPECAN_ATTR_IM_LOCAL_PEAK_SEARCH_ENABLED | Specifies whether to enable a local peak search around the tone or intermod frequencies to account for small frequency offsets. |
| RFMXSPECAN_ATTR_IM_MAXIMUM_INTERMOD_ORDER | Specifies the order up to which the RFmx driver measures odd order intermodulation products when you set the RFMXSPECAN_ATTR_IM_AUTO_INTERMODS_SETUP_ENABLED attribute to True. The lower and upper intermodulation products are measured for each order. |
| RFMXSPECAN_ATTR_IM_MEASUREMENT_ENABLED | Specifies whether to enable the IM measurement. |
| RFMXSPECAN_ATTR_IM_MEASUREMENT_METHOD | Specifies the method used to perform the IM measurement. |
| RFMXSPECAN_ATTR_IM_NUMBER_OF_ANALYSIS_THREADS | Specifies the maximum number of threads used for parallelism for the IM measurement. |
Attachments
None